How to apply "Iron-On Labels" - Hints & Instructions

• Please try a couple of applications on a sample at first; we have put some extra labels for you to do this.  
• Iron-On Labels are a transfer type and once applied they are hard to remove
• Apply Iron-On Labels ideally on garment to ensure you won't accidentally iron over it in the future

Instructions

1. Set iron to "dry" mode, temp. 130-170 degrees (middle or wool setting, no steam).
2. Holding iron flat, press the name tape in place, text up, for 10-15 seconds. DO NOT move the iron around.
3. Allow the garment to cool down.
4. Repeat steps 2 and 3 again (total of three pressings and cooling).
5. Use a thin pressing cloth on delicate fabrics (eg swimmers, silk)

 

How to apply "Vinyl Labels" - Hints & Instructions

• Labels can be applied to most smooth, clean and dry surfaces
• The labels are microwave reheat able, dishwasher & weather resistant
• Extreme heat (eg steam sterilising) may change appearance of label

Instructions

1. Make sure surface is clean and dry
2. Peel off label gently and press firmly after it has been applied.

 

How to apply "Funky-Feet Shoe Labels" - Hints & Instructions

• Funky-Feet Labels are build to last and once applied they are hard to remove
• Make sure Funky Feet are positioned in the right foot - left to left, right to right
• Be careful you don't rip the toes off when peeling the label of the paper

Instructions

1. Make sure shoe sole is clean and dry
2. Apply Funky Feet to inner sole of shoe and press firmly